[SOLVED] VE216 Lab1

• Measure the output response of the series RC circuit for a variety of inputs, including a step, a combination of a step and a ramp, and a sinusoid
• Compare results to those computed as part of pre-lab assignment

2           Procedure

Setup

• Function generator: Utility → Output Setup → Load → High Z

.Trigger Mode → Basic



• Oscillator: Trigger Menu → 2.Edge Trigger (Rising Edge)

^3.Trigger Settings → DC Coupling

• RC circuit: R = 1 KΩ, and C = 1 µF

Part 1: Step Response (1 pic + bonus)

• Function generator:

Square wave             Vpp: 1V             frequency: 100Hz

• Oscillator:

CH1: 200mV/div              CH2: 200mV/div             Time: 2ms

• Bonus: Compare your results with the ideal case 1

Part 2: Pulse Response (2 pics)

• Function generator: Pulse frequency: 100Hz

1. Width: 1ms A: 100mV
2. Width: 0.5ms A: 200mV

Part 3: Ramp Response (1 pic)

• Function generator:

Ramp             Vpp: 100mV             frequency: 100Hz

Part 4: Sine Response (1 table + bonus)

• Function generator: 10 Vpp

• Bonus: Compare your results with ideal case

3           Deliverables

Yout should submit a post-lab report containing the following:

1. Objectives
2. Theoretical background
3. Experiment procedures
4. Experimental results (numerical results, figures)
5. Error analysis, and discussion
6. Conclusion

Each group needs to submit only one report.