Homework No. 2 β Estimating Pore Pressure
Please direct any questions to the discussion forum. To see the current time in UTC, please google current time in UTC
In this homework assignment, you will be estimating the pore pressure from the porosity and the overburden stress calculated using the Gulf of Mexico (GOM) data from HW1.
Utilize a program such as Matlab, Excel, R, or Python for calculation and answer the questions below.
Use the following units in your plot: βftβ for depth, βpsiβ for pore pressure, and βpsi/ftβ for pore pressure gradient.
I. Estimate the depths of Gulf of Mexico overpressure
1. Assume an exponential porosity reduction with the effective vertical stress given by the following empirical equation:
Ο=Ο0eβΞ²ΟV
sV = SV – Pp
in which f is the porosity, f0 is the initial porosity, b is the coefficient of compaction, SV is the overburden stress, and Pp is the pore pressure. Assuming f0 = 0.4 and b = 0.0002 psi1 (Flemings et al., 2002), using the hydrostatic pore pressure 0.44 psi/ft, your calculation of the overburden stress from HW1, to predict porosity over the full depth range of the GOM data set. A porosity is calculated assuming full saturation of 1.0 g/cm3 water in the pores and a 2.7 g/cm3 density of matrix in HW1. Plot the predicted porosity versus depth and the calculated porosity versus depth obtained in HW1 on the same plot.
II. Estimate the magnitude of Gulf of Mexico overpressure
1. Rearrange the equation in I to obtain an expression for pore pressure as a function of porosity. Calculate the pore pressure using the density porosity and the overburden stress which are obtained in HW1. Plot this calculated pore pressure as well as the hydrostatic pore pressure and the overburden stress versus depth on the same plot.
2. By subtracting hydrostatic pore pressure from the calculated pore pressure using porosity data, estimate the magnitude of the overpressure in the GOM data set.
III. Answer the questions on the page below
